Main Units; Removing The Pickup Assembly - Canon Paper Deck Unit-F1 Service Manual

Main Units

Removing the Pickup
Assembly
■ Preparation
1. Open the Compartment."Opening the
Compartment " on page 43
2. Remove the Left Upper
Upper Cover" on page 36
■ Procedure
1. Remove the Connector Holder[1].
• 1 Screw[2]
• 3 Connectors[3]
1x
3x
Cover."Removing the Left
[1]
[2]
[3]
2. Remove the Pickup Assembly[2] while releasing the
Coupling[1] toward the direction of the arrow.
• 4 Screws[3]
CAUTION:
Slide Guide (Upper) must be positioned as shown in
the figure when replacing the Pickup Assembly.
4x
[3]
NOTE:
Release the Coupling when the Pickup Assembly is
installed.
CAUTION:
Be sure to keep opening the Compartment while
attaching the Pickup Assembly. It may cause not to
open the Compartment or damage the Pickup
Assembly with closing it.
■ Actions when Replacing the Parts
"Pickup Assembly " on page 64
42
4. Disassembly/Assembly
[1]
[2]
[3]