Canon Booklet Trimmer-A1 Service Manual page 96

CHAPTER 3 MECHANICAL SYSTEMS
6) Detach the lower press assembly [1].
If the trimming angle (i.e., par-
allelism between the folding
face and the trimming face) of
the booklet produced during
testing after the trimmer body
has been re-assembled is not as
indicated below, make adjust-
ments as follows:
3-28
COPYRIGHT© 2002 CANON INC.
F03-503-05
F03-503-06
Standard: A-B< ± 1 mm
Fold side
F03-503-07
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
A
Cut side
B