Table of Contents
Advertisement
8.1. Detach the window
1.
Release the top of the window by pulling forward and rotating
outwards the two bars at the top corners. See figure 35.
2.
Unscrew the two spring loaded bolts securing the bottom of the
window. See figure 35.
3.
Carefully lift the window. Keep the window and bolts in a safe place.
8.2. Check ignition spark
The pilot burner and electrode unit is at the left end of the burner.
Push in the lighting knob and turn counter-clockwise through the "IGN"
position to "PILOT". A spark should flash across from the pilot electrode
to the pilot burner shield. see figure 36.
Figure 36
8. APPLIANCE PREPARATION
23
Figure 35
Advertisement
Table of Contents
