Heater engine 530SAN is used on Natural gas installations.
Heater engine 530SAP is used on Propane installations.
The supply pressure must be between the limits shown in section 3.2 of this manual.
3
The supply connection is
/
8
The opening for the gas supply line is at the rear left corner of the appliance.
#530SAN & #530SAP Engine unit (Either log or coal
version supplied)
1
Appliance engine unit fitted with window
2
Restrictor plates type #1 for log versions
2
Restrictor plates type #2 for log versions
2
Restrictor plates type #3 for log versions
2
Restrictor plates type #4 for coal versions
2
Restrictor plates type #5 for coal versions
2
Restrictor plates type #6 for coal versions
1
Port cover
1
Gas inlet pipe connection adapter
1
Firebox ceramic rear wall
2
Firebox ceramic side walls
5
Ceramic fuel effects (logs or coals)
4
Wood screws
4
Wall plugs
2
Thread cutting screws
1
Deluxe remote control kit
#531CSB President free standing case (Alternative)
Top pack
1
Top casting
1
Top infill plate
Sides pack
1
Front casting unit
2
Side casting units
1
Top air deflector
1
Switch mounting bracket
2
Wall spacer brackets
2
Self cutting screws
4
Machine screws
4
Washers
Take care when removing the contents from the packaging to prevent damage. Check that all the contents are in the packs and
are undamaged.
6. SUPPLY GAS
''NPT.
7. PACK CONTENTS
#536XFB President Zero Clearance case
1
Front unit
1
Top air deflector
2
Stand-off spacers (Supplied flat)
2
Top insulation layers
1
Outer surround unit
1
Front plinth
1
Rear base support channel
1
Pack of thread cutting screws
2
Hooks (For hanging the front)
#551DVK Standard horizontal through-the-wall vent
kit (Alternative to Dura-vent unit)
1
Vent pipe & terminal unit
2
Wall plates
2
Wall shields (Supplied flat)
12 Thread cutting screws
1
Styrofoam cutting support do-nut
8
Wood screws
8
Wall plugs
#555CFK Circulating fan kit (Additional option)
Details are with the kit
22