Venting Configurations - Valor 530SAN Installation And Owner's Manual

5.2. Venting configurations

5.2.1. Flat on wall (Fig. 22)
Requires standard vent kit #551DVK only.
The horizontal vent run can not be extended by the use of any
vent accessory pipes.
5.2.2. Flat on wall with snorkel termination (Fig. 23) Figure 22
For use on horizontal vent installations where the outside ground
level is too close to the standard terminal. Adapter #817VAK, a
Dura-vent pipe length and snorkel termination #981 or
#982 will be required (See vent options section of this
manual).
Figure 23
15