Table of Contents
Advertisement
8.8. Attaching top air deflector
Fit the top air deflector under the top panel of the
appliance case. Secure with two thread forming screws.
See figure 48.
8.9. Attaching Outer Surround - ZC Models Only
1.
Locate the surround over the appliance.
2.
Secure the surround to the sides of the appliance case with four
thread cutting screws supplied. Screw from outside through the access
holes in the surround – See figure 49.
3.
The outer surround has alternative locating tabs allowing its front
1
face to be positioned
/
", ¾" or 1" in front of the framing studding.
2
This enables a variety of wall finish thicknesses to be used which will
be level with the front surface of the surround. The surround is
supplied with all the tabs flat.
Check the wall finish requirements with the home owner. Bend the
appropriate tabs – See figure 21.
Figure 48
Figure 50
28
Advertisement
Table of Contents
