Table of Contents
Advertisement
14.2. Ceramic Logs Installation
(See Section 14.3 for ceramic coals)
1.
Place the base log on the supports in the firebox and against the firebox back. See figure 64.
2.
Place the rear log over the base log. Locate the holes in the top log into the pegs in the base log. See figure 65.
3.
Place the front log behind the metal lip at front of the firebox. See figure 66.
4.
Place the right side log in the hollow at right of the base log. Rest the narrow nose of this log on the projection at front
center of the base log – It is important that the narrow nose does not drop down to touch the burner . See figure 67.
5.
Place the left side log on base log at the left side. Locate its nose tip behind the nose of the right side log. It is important
that the narrow nose does not drop down to touch the burner. See figure 68.
Figure 64
Figure 67
Figure 65
Figure 68
36
Figure 66
Advertisement
Table of Contents
