Table of Contents
Advertisement
5.1. Framing
The framing dimensions for
appliances with rear vent
connection are shown in figure 19.
The framing dimensions for
appliances with top vent connection
are shown in figure 20.
The Zero clearance unit allows the
front of the appliance surround to
1
be positioned
/
", ¾" or 1" in front
2
of the framing studding (see figure
21). This enables a variety of wall
finish thicknesses to blend with the
appliance surround.
•
A non combustible hearth is
not necessary in front of this
appliance.
•
Any framing construction must
be clear of the standoffs (See
figures 2 & 3).
•
1/
Be aware of the area 7
26¼" (19cm x 67cm)
immediately above the opening
which must be constructed
with non-combustible materials
as shown in figures 19 & 20
Figure 20 Framing for top vent installations
5. LOCATION – PRESIDENT ZC
" x
2
Figure 19 Framing for rear vent installations
Figure 21 Surround locating tabs
14
Advertisement
Table of Contents
