Headlight Leveling Switch (If So Equipped) - Mitsubishi LANCER Owner's Manual

Features and controls
4. The headlights will come on in the low beam setting for
about 30 seconds. After the headlights go off, the head-
lights can be turned on again in the low beam setting for
about 30 seconds by pulling the turn signal lever toward
you within 60 seconds of turning the ignition switch to the
"LOCK" position. To turn on the headlights again after 60
seconds of turning the ignition switch to the "LOCK"
position, repeat the process from step 1.
NOTE
While the coming home light function is operating, per-
form one of the following operations to cancel the func-
tion.
3
• Pull the turn signal lever toward you.
• Turn the combination headlights and dimmer switch to
the " " or "
• Turn the ignition switch to the "ON" position.
It is possible to modify functions as follows:
• The time that the headlights remain on can be changed.
• The coming home light function can be deactivated.
For details, consult a Mitsubishi Motors dealer.
3-224
" position.
Headlight leveling switch
The direction of the headlight beam (the direction in which the
light shines) alters according to the number of people and the
load in the vehicle. Lower the headlight angle if it is too high
due to the number of people and/or the load in the vehicle so
that the headlights' glare does not distract the drivers of
approaching vehicles. First set the combination headlights and
dimmer switch to the " " position, then turn the headlight
leveling switch knob to lower the beam. The greater the num-
ber on the headlight leveling switch knob, the lower the beam
will point.
Set the switch to the appropriate position so that the headlight
beam is level with the road.
(if so equipped)
N00537100088