Worth Data TriCoder t53 User Manual page 91

Press YES at the PROGRAMMING MODE? prompt, then enter the
password, WDTRI to get to the Programming Menu. Entering the
password incorrectly generates the message:
Entering the password incorrectly 2 times generates the following message:
At this point, you will be returned to the Mode Menu to start again. If you
have entered the password correctly, you see the PROGRAM FUNCTION
menu:
Press the number of the program you wish to create; 1,2, or 3. The TriCoder
then displays:
Press YES. If you press NO, the TriCoder asks if you want to delete the
program. Use this to delete an existing program and create a new one in its
place. After answering YES to the EDIT PROGRAM prompt, the TriCoder
is ready to create a program.
Parts of the TriCoder programming screen
Before you start programming the TriCoder, it helps to know what the
TriCoder is asking you at each step. The text below is an example of what
you see on the TriCoder screen when creating a program.
The word PROMPT describes what field in the program statement you are
working on; in the example above we are at the Prompt Text field.
The 01 tells us what statement number we are working on. In the example,
we are working on statement #01. If we were working on statement #03,
the text would look like this:
The cursor beneath the word PROMPT is waiting for input. In our
example above, we would then type the text we want to use for our user
prompt for statement #03.
INCORRECT PASSWORD
HIT ANY KEY_
ACCESS DENIED
HIT ANY KEY_
Create Programs ------>1-3
Voice Operations------->4
Change Setup----------->5
Data File Names-------->6
EDIT PROGRAM x?
KEY [YES/NO]
PROMPT
_
PROMPT
_
8-2
(x is 1, 2, or 3)
01
03