Shut Down Time; Partitions - Worth Data TriCoder t53 User Manual

Shut Down Time

By default, if the TriCoder is inactive for more than 5 minutes, it will shut
itself down in order to conserve batteries. To resume operation, you must
turn the TriCoder back on using the ON/OFF key. To change the amount of
time the TriCoder waits before shutting down:
• Scan Shut Down Time
• Scan two digits - the default is 05 (5 minutes)- to correspond to the
length of time in minutes. For example, 01 would be 1 minute.
If you want to prevent the TriCoder from shutting off automatically at all,
set the Shut Down Time to 00.

Partitions

The Partitions setting is where you specify how you want to divide the
memory in the TriCoder. Memory can be allocated for data files (up to 3)
and tables (up to 3). Memory is partitioned in 64K size pages. The
TriCoder has 512k, or 8 pages, of memory to allocate. Partitions are
specified using a six-digit number:
where:
a
b
c
x
y
z
• The default is for all memory to be allocated to Data File #1.
• The total amount of memory partitioned must equal the total amount of
memory available. You must specify 8 pages (in whatever
combination) for the TriCoder.
• The Partitions cannot be changed while there is data collected in the
TriCoder. You must upload and delete the data first.
• All downloaded tables currently in the TriCoder will be lost when the
Partitions are changed. You will have to re-download the tables once
the change is complete.
abcxyz
is the number of pages of memory allocated to Data File #1.
is the number of pages of memory allocated to Data File #2
is the number of pages of memory allocated to Data File #3
is the number of pages of memory allocated to Table #1
is the number of pages of memory allocated to Table #2
is the number of pages of memory allocated to Table #3
6-24