Accessing Voice Message Operations - Worth Data TriCoder t53 User Manual

Accessing Voice Message Operations

Voice Operations are accessed two ways. The first way is the usual access
from the Programming Mode menu. The second way is "hotkey" access
when you are creating a program or assigning errors messages
From the Programming Mode menu...
Enter the Programming Mode by answering "NO" to all Operation Mode
prompts until you get to:
Press "YES". The TriCoder then asks for a password. Key in the password
WDTRI (this is the same password discussed previously in this manual).
Entering the correct password produces the following prompt:
Press the "4" key to select Voice Operations. The next prompt displayed is:
Pressing the "1" key takes you into the voice recording and playback
function. Pressing the "2" key allows you to assign voice message numbers
to error conditions.
Using the "hotkey"...
The other way to get into the voice recording and playback function is by
using a "hotkey" sequence. If you are in "PROGRAMMING MODE" and
have chosen "Create Programs", press the SHIFT key, then the F1 key,
and then the F2 key. This key combination will take you to the
"Record/Playback" function. This same "hotkey" sequence of SHIFT F1
F2 will work if you are in the "Assign Errors" function and want to record
or playback a message. Pressing F1 while in the "Record/Playback"
function will take you back to the program or error message you were
working on.
PROGRAMMING MODE
KEY [YES/NO]?
Create Programs->1- 3
Voice Operations->4
Change Setup----->5
Data File Names-->6
VOICE OPERATIONS KEY
Record/Playback->1
Assign Errors----->2
13-3