Voice Message Options - Worth Data TriCoder t53 User Manual

Now you're ready to listen to your first recording. Press the P key and key
in 03 for the message number. Do not be discouraged if you didn't record
the entire message. Our first attempt produced "EM" in a very frantic tone
of voice. Practice speaking clearly and calmly (think of the poor guy who
has to hear it 10,000 times next week) as soon as the key is released. You
will get the hang of it with just a little practice.
That is the way all messages – prompts and errors - are recorded. If you are
not sure which message numbers are blank, you can listen to messages until
you find a blank for recording.

Voice Message Options

To play back the voice messages you have recorded, they must be
designated for use when creating a data collection program in the TriCoder.
Once the programming is complete, the operator has the following options
available from the TriCoder keypad:
Operation
To turn OFF all
voice messages
To turn ON all
voice messages
To turn OFF prompt
Messages but not
error messages
To replay the current
voice message
Keypad Sequence
1. Press the SHIFT key
2. Press the F1 key
3. Press the S key
1. Press the SHIFT key
2. Press the F1 key
3. Press the V key
1. Press the SHIFT key
2. Press the F1 key
3. Press the P key
1. Press the F2 key
13-5