Fail-Safe Re-Initialization Procedure - Worth Data TriCoder t53 User Manual

Fail-safe Re-initialization Procedure

Here is a fail-safe way to re-initialize the TriCoder and set it back to the
factory defaults: (also useful for deleting a data file and programs no longer
needed).
1. After turning on the TriCoder, answer NO to all prompts until you
see
At the NON PORTABLE MODE prompt, press the F1 key.
2. Press the SHIFT key.
3. Press the D key. After pressing the D key, you should see the
prompt:
4. Press the SHIFT key.
5. Now press one of the following keys depending on what you want
to happen:
6. Press the F1 key to go back to the opening screen.
NON PORTABLE MODE?
KEY [YES/NO]?_
PLEASE ENTER
DIAG. COMMAND_
Press the 6 key to delete only the current data file.
Or
Press the 7 key to delete programs 1-3.
Or
Press the 8 key to load default programs, set program
voice messages to 00, and leave error voice messages
unassigned.
Or
Press the 9 key to load default programs, sets program
voice and error messages to defaults.
Or
Press the 0 key to load default programs but clear all
voice to unassigned and all program voice messages to
00.
14-15