Worth Data TriCoder t53 User Manual page 151

HOST NOT RESPONDING
HIT ANY KEY_
IDENTIFIER ERROR
HIT ANY KEY_
IN DIAG MODE
HIT ANY KEY_
INIT FAILED
CYCLE POWER_
INCOMPLETE PGM
PRESS ANY KEY_
INVALID DATA LEN
HIT ANY KEY_
INVALID DEVICE
HIT ANY KEY_
INVALID FILE #
HIT ANY KEY_
INVALID HEADER
HIT ANY KEY_
INVALID TABLE #
HIT ANY KEY_
INVALID PASSWORD
HIT ANY KEY_
INVALID PGM #
HIT ANY KEY_
INVALID STMT. #
HIT ANY KEY_
ITEM NOT FOUND n
HIT ANY KEY_
LITHIUM BATTERY LOW
Press any key_
Memory has been lost
Press any key_
NMI ERROR
Cycle Power_
NONPORTABLE MODE
_
NOT ALLOW TO RCV
HIT ANY KEY_
OUT OF MEMORY
HIT ANY KEY_
PLEASE ENTER
DIAG COMMAND_
Possible Data Loss
Press Any Key_
PROGRAMMING MODE?
KEY [YES/NO]?_
The TriCoder requested a table but
the host is not responding.
You have entered data that doesn't
match the DATA ID specified.
TriCoder was shipped without
being re-initialized. See
Troubleshooting section.
Initialization failed.
Unit was shut off or went to sleep
during programming.
You have tried to enter 00 for Max
Data Length. Entry must be at
least 01.
You have specified a character
other than K W or ENTER for the
INPUT DEVICE.
You have entered a character other
than 0,1,2,or 3 at the Data File No.
Prompt.
The Header Record in a table has
an invalid format.
You have entered a character other
than 1,2, or 3 for the Table Number
prompt
You have not entered the correct
password.
You have entered something other
than 0,1,2, or 3 in Programming
Mode or 1,2, or 3 for Data
Collection Mode
Your program has an undefined
statement # in it.
An item entered in the TriCoder
has not been found in table n.
The backup lithium coin battery is
low and needs replacing
BIG memory problems. This is not
a low lithium battery problem.
This is not a problem unless it
repeats itself.
You are operating in Non Portable
mode - the TriCoder transmits data
immediately to the host computer
without saving in memory.
You are trying to receive a program
on the TriCoder but there is data
still present in the TriCoder.
You have filled the memory and
must upload before you can collect
any more data.
TriCoder is in diagnostic mode,
waiting for a command.
Slight memory problem. Not a
problem with the lithium battery.
Watch TriCoder closely.
Do you want to write, edit , review
or delete a program? Also allows
access to voice operations.
14-3
Check host computer.
Re-enter your data or
change the DATA ID.
Re-initialize TriCoder
Power OFF/ON.
Check program for errors.
HIT ANY KEY. Re-enter
data length.
HIT ANY KEY. Enter a valid
character.
HIT ANY KEY. Enter a valid
number.
Check header record, fix
and retry.
HIT ANY KEY. Enter a valid
number.
HIT ANY KEY. Enter the
correct password - WDTRI.
HIT ANY KEY. Enter the
correct number.
HIT ANY KEY to go to error.
HIT ANY KEY. Enter
another item number or
check table data.
Press any key. Change
lithium battery.
Call for repair.
Cycle Power. If error repeats
itself, call for support.
Continue to enter data.
Press F1 to get to Mode
Menu.
HIT ANY KEY. You must
upload and delete any data
in TriCoder before you can
receive a program.
HIT ANY KEY. Upload data
and continue with data
collection.
Enter the correct diagnostic
code or press F1 to exit.
Call for support if problem
continues.
Press YES to enter
PROGRAMMING MODE.
Press NO to return to Mode
Menu.