Uploading Data - Worth Data TriCoder t53 User Manual

If during data collection, the TriCoder displays the following message:
it means that the TriCoder has only 2K of memory left to collect data. This
is a good time to go and upload your data. You can continue to collect data
but you will eventually get this message:
Pressing a key will take you out of Data Collection mode and
back to the Mode Menu. You will have to upload your data before you can
collect any more.
When you are ready to go back to collecting data, press the F1 key at any
time to begin appending data to the existing data file. The F1 key also backs
you out of any mode you are in; for example, if you are in Non Portable
mode, pressing F1 takes you back to the Data Collection prompt of the
Mode Menu.

Uploading Data

Step
Once you have collected your data in Program #1, uploading that
4
data to the computer is the final step. For the tutorial, we assume
that you have successfully established communication between
the computer and the TriCoder. If you have not, go to Chapter
3; Non Portable Mode, and establish communication first. If you are ready to
upload, go to Chapter 4; Uploading Data and proceed with your upload.
WARNING 2K LEFT
HIT STATUS KEY_
OUT OF MEMORY
HIT ANY KEY_
2-5