Message Numbers; Data Id - Worth Data TriCoder t53 User Manual

Message Numbers

Program
The MESSAGE NUMBER field is where the voice messages
are specified for the current statement. Up to 2 voice messages
Prompt
can be specified for each statement:
5
MESSAGE NUMBERS 01
0000_
Each voice message is identified using a 2 digit number. If two messages
are specified, the first message is played, followed immediately by the
second message. For example, the following program field would play
message #5 (ENTER), then message #7 (ITEM):
To play no voice messages, specify 0000.
At this point in programming, you can get into the Voice Operations menu
by pressing :
− press SHIFT
− press F1
− press F2
This allows you to record or listen to voice messages while you are
programming. To exit back to programming, press the F1 key.
For complete details and information on Voice Messages and their uses, see
Chapter 13; Voice Messaging.

Data ID

Program
The next field in the programming is the DATA ID field.
Prompt
6
The DATA ID field has 5 different functions, depending on
what is entered at the prompt:
1. Data Identifiers
The first function of the DATA ID field is to specify Data Identifiers
for the data entered for the current statement. Data Identifiers are
commonly used by the Automotive and Retail industries and are used
MESSAGE NUMBERS 01
0507
DATA ID
_
1. Data Identifiers
2. UPC/EAN Check Digit verification
3. Table Access
4. Display Date/Time
5. Prevent Duplicate Entry
8-11
01