Table of Contents
Advertisement
to the program number being transmitted from the other TriCoder or host.
After making a selection, the TriCoder displays:
At this point, you can start the transmitting TriCoder or host program. Once
the transmission is complete, the receiving TriCoder displays:
Press any key to return to the Mode Menu.
If the TriCoder has a problem during the transmission, the transfer will end
and the TriCoder will display the following error message:
If you receive this message while receiving a program, the program transfer
is incomplete and the transmit/receive session will have to be restarted. To
avoid any problems, do not press any keys on the TriCoder once the
transmission has started.
RECEIVING PROGRAM
PLEASE WAIT
END OF PGM. RECV
HIT ANY KEY_
DATA XMIT ERROR
CYCLE POWER
10-3
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the TriCoder t53 and is the answer not in the manual?
Questions and answers