Worth Data TriCoder t53 User Manual page 135

The fourth field is U03 - describing a field that is three characters long and
is Updatable. Updatable fields can be changed by keying or scanning. The
cursor of the TriCoder will stop at the Updatable field and wait for operator
input. The fourth field in this example is the quantity to pick:
The last field in the header, Pick List 1, is the Order Number that may be
uploaded as the first record in the data file. This allows the computer to tell
which order was picked. This field can be from 1 to 20 characters long. If
you do not specify that you want the Order Number written to the data file,
it is ignored.
If you want the Order Number to be written to the data file for uploading,
you must specify
in the DATA ID field of the programming statement when programming the
TriCoder.
Programming the TriCoder for Pick Lists
There are some special considerations to think about when programming
the TriCoder to use a Pick List:
•
When using O1O, O2O or O3O to upload the order number for
a pick list, remember that the program statement should be
executed only once, and should be at the beginning of the
program. This program statement will not cause the TriCoder to
pause for operator input so the Prompt Text is not that important.
An Upload Prefix and Suffix can be specified for the statement.
•
When the TriCoder executes a statement with P1P, P2P or P3P
in the Data ID, the TriCoder displays the next incomplete item in
the Pick List. When all items in the Pick List have been picked,
and the TriCoder executes the PxP statement again, the TriCoder
will display:
111111
222222
333333
444444
014
012
005
001
O1O
-order number for table 1
O2O
-order number for table 2
O3O -order number for table 3
PICK LIST COMPLETED
HIT ANY KEY_
12-9