Worth Data TriCoder t53 User Manual page 153

TABLE NOT DEFINED
HIT ANY KEY_
TABLE NOT FOUND
HIT ANY KEY_
TABLE NUMBER
KEY [1-3]?_
TABLE DOWNLOAD?
KEY [YES/NO]?_
TABLE TOO BIG
PRESS ANY KEY_
TRANSMIT PROGRAM KEY
Programs [1-3]------->1-3
Clone TriCoder?----->0
TRICODER x9nnn
HIT ANY KEY_
UPLOADING DATA
PLEASE WAIT_
USB Enumeration
Please wait.....
USB not Connected
Connect Cable,
Then Press a Key
Or F1 to Exit
USB not Connected
Connect, Hit any Key
or F1 – Exit
or F2 – Display Only
USB not Connected
Connect, Hit any Key
or F1 – Exit
or F2 – Delete File
VOICE OPERATIONS KEY
Record/Playback------>1
Assign Errors----------->2
Waiting on
Host Program
Or F1 to Exit
WAITING ON PMPT_
You are trying to download a table
to a table number that is not
defined in the Partitions.
A table referenced in a data
collection program does not exist.
You have requested to download a
table. Now choose which table
number you want to download to.
A table is defined and ready for
download. Do you want to
download?
Not enough memory was allocated
to accept the table you are
downloading.
You have answered YES to
Transmit Program? prompt.
Choose program to transmit or
clone entire TriCoder.
TriCoder opening screen. Displays
firmware version.
Collected data is being uploaded to
host.
At power on or when a cable is
plugged in, TriCoder must
enumerate as a USB device. Also
happen when changing modes.
Computer Interface is set to USB.
A mode has been selected to
transfer data. The USB cable is
not plugged in.
You have answered YES to Non
Portable Mode when the TriCoder
is configured for USB interface and
NOT connected to the USB port on
the computer.
You have answered YES to Data
Upload Mode when the TriCoder is
configured for USB Interface and is
NOT connected to the USB port on
the computer.
Voice Operations Menu accessed
through Programming Mode.
USB cable is plugged in. Upload
has been started. TriCoder is
waiting on Tri Utilities to be started.
TriCoder is in Non-Portable Mode,
operating with HOST RESPONSE
ACCEPTED and is waiting from a
prompt from the host.
14-5
Go to Setup and define the
table in the Partitions
parameter.
Download table or correct
program to reference
correct table.
Choose a defined table
number to download to.
Press YES to proceed with
download process.
Press NO to return to Mode
Menu.
Re-allocate memory or
change table size.
Press 1,2, or 3 to transmit
that program or Press 0 to
clone entire TriCoder.
HIT ANY KEY.
Wait for upload to finish.
Just wait a few seconds.
There is nothing to do.
Advisory only.
Connect USB cable and
press a key or F1 to Exit to
Mode Menu.
If you want to see the data
on the computer, connect to
the USB port, then press
any key. Press F1 to exit
Non Portable Mode or press
F2 to simply display the data
on the TriCoder screen
without transmitting to the
computer.
If you want to upload via the
USB port, connect the
TriCoder to the USB port
and press any key. Press F1
to exit Data Upload Mode or
press F2 to delete the data
file from the TriCoder
without transmitting it to the
computer
Press 1 to record or
playback voice messages.
Press 2 to assign error
messages.
Start the TriCoder Utilities.
Wait for prompt from Host or
press F1 to bypass.