Tying Up The Cables Using Cable Ties - Christie LX1750 User Manual

Connections

Tying up the cables using cable ties

Keep the cables tidy by fixing the cables connected to the terminals into the cable holders on the projector body.
z The cable ties can be reused. (The tab can be loosened and released.)
■ Loosening the cable ties z
(i)
1) Pull the tab in the direction of arrow (i).
2) Pull the tab in the direction of arrow (ii).
z
z The loop of the cable tie will widen.
Attention
z The following items are cautions when you use the cable tie.
–zNoises may occur for rare occasions.
–zDo not pull the cable forcibly. Doing so may cause disconnection.
–zIt is recommended that you allow some slack when the cables are tied.
Caution
When connecting the projector to a computer or an external device, use the power cord supplied with the
device and commercially available shielded cables.
28 - ENGLISH
(ii)
Tab
Cable tie
Cable holders
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)