About Your Projector; Remote Control - Christie LX1750 User Manual

About your projector

Remote control

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
(1) Remote control signal emitters
(2) Remote control indicator
Flashes by pressing any buttons.
(3) <LIGHT> button
Press once to light the control buttons for ten seconds.
(18)
(4) Power <ON> button
Starts projection when the main power switch on the projector is set to
(19)
standby mode.
(20)
(5) <SHUTTER> button
Opens and closes the shutter. (
(7)
(6) <MENU> button
(21)
Displays the menu screen. (
(7) ▲▼◀▶ button
(22)
Move the cursor on the on-screen menu and control menus.
(23)
Also move the image vertically and horizontally in the digital zoom mode or the real mode.
(8) <LENS SHIFT> button
Slides the lens vertically and horizontally to move the position of the projective image
vertically and horizontally. (
(24)
(9) <FOCUS> button
Adjusts the focus. (

(10) <ZOOM> button
Adjusts the zoom of the lens. (
(11) <FREEZE> button
Temporally freezes the projected image. (
(12) <D.ZOOM> button
Turns on the digital zoom mode.
(13) <P-TIMER> button
Press the <P-TIMER> button to count the time elapsed from the press of the button or
perform a countdown from the set time. (
(14) <KEYSTONE> button
Corrects the keystone effect. (
(15) <INFO.> button
Displays state of signals during projection and current settings. (
(16) <ON>/<OFF> switch
(25)
Set to <ON> when using the remote control.
Set to <OFF> when not using the remote control for a long period.
(17) Wired remote control terminal
When the remote control is used as a wired remote control, connect this terminal on the
remote control to the <R/C JACK> terminal on the projector.
The remote control requires batteries. (
(18) Power <STAND-BY> button
Sets the projector to the standby mode when the main power switch on the projector is set
to and in the projecting mode.
(19) <SCREEN> button
Selects the size of the projected image.
If you press the button for at least five seconds, the settings of the [Screen] menu return to
the factory default settings. (
(20) <AUTO PC> button
Automatically adjusts synchronization, total number of dots, horizontal shift, and vertical
shift. ( page 46)

(21) <SELECT> button
Selects item indicated by the cursor on the on-screen menu.
Also used to expand and contract the image in the digital zoom mode. (
(22) <IMAGE ADJUST> button
Displays the [Image adjust] menu to adjust the image. (
(23) <IMAGE SEL.> button
Selects the mode from [Image select]. (
(24) <INPUT 1> - <INPUT 4> buttons
Selects the input signal to project. (
(25) Number (<0> - <9>) buttons
Used to enter PIN codes and remote control numbers.
About your projector
page 37)

page 40)

page 35)

page 36)
page 36)

page 37)

page 39)

page 38)

page 23)

page 39)

page 38)

page 37)

and in the
page 39)

page 40)

page 34)

ENGLISH - 19