[Screen] Menu; [Normal]; [Full]; [Wide(16:9)] - Christie LX1750 User Manual

[Screen] menu

Select [Screen] from the main menu on the
menu screen, and select the item from the sub
menu.
For operation of the menu screen, refer to
"Navigating through menu" (
z After selecting the item, press ▲▼◀▶ to make
the setting.
Remote control
z You can also display sub menus using the
<SCREEN> button on the remote control.

[Normal]

Displays the maximum allowable size while retaining
the aspect ratio of the input signal.
1) Press ▲▼ to select [Normal].
2) Press the <SELECT> button.

[Full]

Displays the full screen size.
z When there is no input signal, this item is grayed
out and cannot be selected.
1) Press ▲▼ to select [Full].
2) Press the <SELECT> button.

[Wide(16:9)]

Displays in widescreen with aspect ratio of 16:9.
z When there is no input signal this item is grayed
out and cannot be selected.
1) Press ▲▼ to select [Wide(16:9)].
2) Press the <SELECT> button.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
page 40).

Control panel

[Zoom]

Stores the aspect ratio and projects at full panel size.
z When there is no input signal, this item is grayed
out and cannot be selected.
z If the image is horizontally wider than the panel
the right and left edges will be cropped. If vertically
longer than the panel, the top and bottom edges
will be cropped.
1) Press ▲▼ to select [Zoom].
2) Press the <SELECT> button.

[True]

Projects the image at the original size.
z This mode can only be adjusted for computer
inputs.
z When there is no input signal, this item is grayed
out and cannot be selected.
1) Press ▲▼ to select [True].
2) Press the <SELECT> button.
■ When the image size is less than z
the panel resolution
The image is projected in the center of the screen,
and [True] is displayed at the top left of the
screen.
■ When the image size is same as z
the panel resolution
[True] is displayed at the top left of the screen, but
the image is subsequently projected in [Normal]
mode.
■ When the image size is larger z
than the panel resolution
[True] is displayed at the top left of the screen,
and ( ) are displayed at the top,
bottom, left, and right of the screen.
Press ▲▼◀▶ to move the image.
z
z The arrow in the direction of movement is
displayed in red.
z
z At positions of maximum shift the arrows
disappear.
*1: The panel resolution of the projector is 1 024 x 768 dots.
[Screen] menu
*1
*1
*1
ENGLISH - 55