[Lamp Interval]; [Edge Blending] - Christie LX1750 User Manual

[Lamp interval]

Sets the replacement cycle when [Lamp select] is set
to [2-Lamps]. After the replacement cycle, the lamp for
use is automatically changed.
z The set time here is a guideline time.
1) Press ▲▼ to select [Lamp interval].
2) Press the <SELECT> button.
3) Press ▲▼ to select an item.
[Off] Does not change lamps.
[24 H]/ Changes lamps in the set intervals.
[200 H]/ z When the set time is reached,
[500 H]/ the projector lights a lamp, giving
[1000 H]/ priority to the lamp with the
[2000 H] shortest total usage time.

[Edge blending]

Makes it less easy to see the join between screens
when multiple screens are used.
1) Press ▲▼ to select [Edge blending].
2) Press the <SELECT> button.
z
z Displays [Edge blending] setting screen.
3) Press ▲▼ to select [Edge blending].
4) Press the <SELECT> button.
5) Press ▲▼ to select [On].
z
z When not performing [Edge blending], select
[Off]. Items other than [Back] will be grayed out
and cannot be selected.
6) Press the <SELECT> button.
z
z The panel edge is displayed in green, changing
to red when the setting value for the edge
blending width is 1 or larger.
Note
z Even when the [Edge blending] setting screen is
displayed, if you press the <ZOOM> button, the
<FOCUS> button, the <LENS SHIFT> button,
or the <SHUTTER> button, the setting screen is
cleared and the selected function is given priority.
On completion of the function, the projector returns
to the setting screen.
z The join between screens may stand out with
certain types of images. Reducing the value of
[Contrast] in the [Image adjust] menu may make
the join look more natural.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
■ To adjust the blending start z
position and blending width
1) Press ▲▼ to select the location
([Start]/[Width] of [Left]/[Right]/[Top]/
[Bottom]) to be corrected.
Sets the blending start position.
[Start] z The frame (green) moves as you
change the numerical value.
Adjusts the blending width.
[Width] z The red line moves as you
change the numerical value.
2) Press the <SELECT> button.
3) Press ▲▼ to change the value, and
press ◀▶ to move between digits.
z
z The numerical values can also be entered using
the number (<0>-<9>) buttons of the remote
control.
z
z Press the <SELECT> button to end the edit
mode.
4) Press the <SELECT> button.
Note
z [Left] and [Right] adjustable value: 0 - 512
z [Top] and [Bottom] adjustable value: 0 - 384
■ To adjust the black level z
Adjusts the black level in the image.
1) Press ▲▼ to select [Black level].
2) Press the <SELECT> button.
3) Press ▲▼ to select an item.
[All] Changes with R/G/B.
Adjusts each color.
[R]/[G]/[B]
z Adjustment value: ±127
[Setting] menu
ENGLISH - 61