[Ceiling]; [Rear]; [Reset] - Christie LX1750 User Manual

[Screen] menu
■ [Corner pattern] z
Selects the corner pattern mode displayed during
corner correction.
1) Select [Corner pattern], and press the
<SELECT> button.
z
z The setting screen is displayed.
2) Press ▲▼ to select an item.
[Red] Displays the corner pattern in red.
[White] Displays the corner pattern in white.
[Blue] Displays the corner pattern in blue.
[Off] Clears display of corner pattern.
■ [Store] z
Stores the correction state.
1) Select [Store], and press the
<SELECT> button.
2) Press ▲▼ to select an item, and press
the <SELECT> button.
The adjustment state remains in
[Store] memory even after removing the
power cord.
The adjustment state is reset when

[Reset]

the power cord is removed.
z
z You can register only one of [Standard] and
[Corner correction].

[Ceiling]

Sets the projection method in accordance with the
installation status of the projector.
If the screen display is upside down, select [On].
z This setting is used when the projector is
installed using the ceiling mount bracket (optional
accessory).
1) Press ▲▼ to select [Ceiling].
2) Press the <SELECT> button.
3) Press ▲▼ to select an item.
[Off]
58 - ENGLISH

[Rear]

Sets the projection method in accordance with the
installation status of the projector.
If the screen display has flipped, select [On].
1) Press ▲▼ to select [Rear].
2) Press the <SELECT> button.
3) Press ▲▼ to select an item.
[Reset]
The setting returns to its value before adjustment .
1) Press ▲▼ to select [Reset].
2) Press the <SELECT> button.
3) Select [Yes], and press the <SELECT>
button.
z
z The setting returns to its value before
adjustment.
z
z Select [No] and press the <SELECT> button to
return to the sub menu.
[On]
[Off]
020-000638-01 Rev.1 (11-2013)
[On]
LX1750 User Manual