Projector Body - Christie LX1750 User Manual

About your projector
Attention
z Do not drop the remote control.
z Avoid contact with liquids or moisture.
z Do not attempt to modify or disassemble the remote control.
Note
z The remote control can be used from any distance within about 5 m if pointed directly at the remote control
sensor. The remote control is effective from angles of up to ±30° vertically and horizontally, but its range may
be reduced.
z If there are any obstacles between the remote control and the remote control sensor, the remote control may
not operate properly.
z You can control the projector by reflecting the signal off the screen, but the effective operating range will
depend on the characteristics of the screen.
z If the remote control sensor receives strong light such as fluorescent light, the remote control may not operate
properly. Place the projector as far as possible from other light sources.

Projector body

(1)
(2) (3) (4) (5) (6) (7) (8) (9) (7)
(1) Lens attachment cover
(2) Air filter unit
(3) Lens (optional)
(4) Indicator ( page 77)

(5) Remote control sensor (top and front)
(6) Connection terminals (
(7) Carry handle
(8) Security slot
This security slot is compatible with the Kensington
security cables.
(9) Control panel (

(10) Air exhaust port
Attention
z Keep your hands and other objects away from the air exhaust port
–zKeep your hands and face away.
–zDo not insert your fingers.
–zKeep away heat-sensitive articles.
Heated air from the air outlet port can cause burns, injuries, or deformations.
20 - ENGLISH
(10)
(12) (13)(14) (10) (11) (7)
page 22)

page 21)
(11)
(7)
(11) Lamp cover
Houses the lamp unit. (
(12) AC input terminal
Connect the supplied power cord. (
(13) Main power switch
Turns off/on the main power.
(14) Remote control sensor (rear)
(15) Adjustable feet
Adjust the projection angle. (
(16) Air intake port
(15) (16) (15)
(15)
page 86)

page 31)

page 25)

LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
(15)