System Management Terminal Interface Summary; Figure 2-5 Zywall 10 Main Menu; Table 2-3 Main Menu Summary - ZyXEL Communications ZyWALL 10 User Manual

ZyWALL 10 Internet Security Gateway

2.5.2 System Management Terminal Interface Summary

# Menu Title
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter and Firewall Setup
22 SNMP Configuration
23 System Password
24 System Maintenance
26 Schedule Setup
99 Exit
2-6
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
ZyWALL 10 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:

Figure 2-5 ZyWALL 10 Main Menu

Table 2-3 Main Menu Summary

Description
Use this menu to set up general information.
Use this menu to set up the WAN.
Use this menu to set up the LAN.
A quick and easy way to set up Internet connection.
Use this menu to set up the remote node.
Use this menu to set up static route.
Use this menu to configure NAT
Use this menu to set up filters as well as activate/deactivate the firewall.
Use this menu to set up SNMP related parameters.
Use this menu to setup a new password.
This menu provides system status, diagnostics, firmware upload, etc.
Use this menu to schedule outgoing calls.
To exit from SMT and return to a blank screen.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
99. Exit
.
Hardware Installation & Initial Setup