High Capacity Input Tray (Hcit) Pick Arm Bracket Assembly Removal - Lexmark T652 Service Manual

4062-XXX

High capacity input tray (HCIT) pick arm bracket assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1. Remove the HCIT cover, left. Go to
2. Remove the HCIT pick arm bracket assembly cable connectors from the HCIT controller card assembly.
Note: Remove the cable from the restraint, and observe the routing for reinstallation.
3. Remove the pick arm lift spring from the drawer.
4-130
Service Manual
"High capacity input tray (HCIT) cover, left removal" on page 4-122.