Tone Control - Icom IC-7300 Basic Manual

Tone Control

SSB RX HPF/LPF
Sets the receive audio high-pass filter and low-pass
filter cut-off frequencies in 100 Hz steps.
L If this item is set, the "SSB RX Bass" and "SSB RX
Treble" items are automatically set to "0."
SSB RX Bmss
SSB RX Treble
Sets the bass or treble level of the receive audio.
AM RX HPF/LPF
Sets the receive audio high-pass filter or low-pass
filter cut-off frequencies in 100 Hz steps.
Selectable ranges:
L If this item is set, the "AM RX Bass" and "AM RX
Treble" items are automatically set to "0."
AM RX Bmss
AM RX Treble
Sets the bass or treble level of the receive audio.
FM RX HPF/LPF
Sets the receive audio high-pass filter or low-pass
filter cut-off frequencies in 100 Hz steps.
L If this item is set, the "FM RX Bass" and "FM RX
Treble" items are automatically set to "0."
FM RX Bmss
FM RX Treble
Sets the bass or treble level of the receive audio.
CW RX HPF/LPF
RTTY RX HPF/LPF
Sets the receive audio high-pass filter or low-pass
filter cut-off frequencies in 100 Hz steps.
(Default: – – – – – – – – –)
(Default: 0)
(Default: 0)
(Default: – – – – – – – – –)
(Default: 0)
(Default: 0)
(Default: – – – – – – – – –)
(Default: 0)
(Default: 0)
(Default: – – – – – – – – –)
(Default: – – – – – – – – –)
SSB TX Bmss
SSB TX Treble
Sets the bass or treble level of the receive audio.
SSB TBW (WIDE)
SSB TBW (MID)
SSB TBW (NAR)
Sets the transmission pass bandwidth to wide, mid,
or narrow, by changing the lower and higher cut-off
frequencies.
AM TX Bmss
AM TX Treble
Sets the bass or treble level of the transmit audio.
FM TX Bmss
FM TX Treble
Sets the bass or treble level of the transmit audio.
8-2
8
SET MODE
(Default: 0)
(Default: 0)
(Default: 100 – 2900)
(Default: 300 – 2700)
(Default: 500 – 2500)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21