D Electronic Keyer Function; D Monitoring The Cw Side Tone; Receiving And Transmitting (Continued) - Icom IC-7300 Basic Manual

4
RECEIVING AND TRANSMITTING
Operating CW (Continued)

D Electronic Keyer function

You can set the Memory Keyer function settings,
paddle polarity settings, and so on of the Electronic
Keyer.
1. Open the KEYER screen in the CW mode.
» KEYER
MENU
L You can select [KEYER] on the MENU screen only in
the CW mode.
2. Touch [EDIT/SET].
• Opens the EDIT/SET screen.
KEYER screen
3. Select the desired item to set.
EDIT/SET screen
4. To close the KEYER screen, push
times.
D MonitoringtheCWsidetone
WhenthetransceiverisinstandbyandtheBreak-In
function is OFF, you can listen to the CW side tone
without actually transmitting.
Information
L
• This enables you to match your transmit frequency
exactly to another station's by matching the audio tone.
• You can also use the CW side tone (make sure the
Break-infunctionisOFF(p.4-12))topracticeCW
sending.
• You can adjust the CW side tone level in "Side Tone
Level."
» KEYER > EDIT/SET > CW-KEY SET >
MENU
SideToneLevel
EXIT
001 SET
Rotate
Push
CW-KEYSET
several
EXIT
4-14
Keyermemoryeditmenu
You can edit the Keyer memories.
EDIT
Contestnumbermenu
You can set the number style, count
up trigger, and present number.
Keysetmenu
You can set the memory keyer
repeat time, dot/dash ratio, paddle
polarity, key type, and so on.