I Tone Control Set Mode - Icom IC-746PRO Instruction Manual
Hf/vhf all mode transceiver
Hide thumbs
Also See for IC-746PRO:
- Manual (164 pages) ,
- Instruction manual (59 pages) ,
- Service manual (7 pages)
Table of Contents
Advertisement
11
SET MODE
I Tone control set mode
D D Entering tone control set mode
Tone levels (bass and treble) for each transmit and re-
ceive audio can be set for each phone mode indepen-
dently.
• Set mode operation
q Push [MENU] several times to select
w Push [F4
] to select the tone control set mode.
e Push [F1 ≤] or [F2 ≥] to select the desired item.
r Push [SSB] or [AM/FM] to select the desired oper-
ating mode.
t Set the desired condition using the tuning dial.
• Push [F3] for 1 sec. to select a default value.
y Push [MENU] to exit the set mode.
D D Tone control set mode items
1.
This item adjusts the bass level of the transmit audio
tone from –5 dB to +5 dB in 1 dB steps.
2.
This item adjusts the treble level of the transmit audio
tone from –5 dB to +5 dB in 1 dB steps.
3.
This item adjusts the bass level of the receive audio
tone from –5 dB to +5 dB in 1 dB steps.
4.
This item adjusts the treble level of the receive audio
tone from –5 dB to +5 dB in 1 dB steps.
89
.
[F1 ≤]
[F2 ≥] [F4
]
[MENU]
Tuning dial
- Quick Links:
- I Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-746PRO and is the answer not in the manual?
Questions and answers
Make icom IC 746 pro general coverage all band
The Icom IC-746PRO provides general coverage reception from 0.03–60MHz and 108–174MHz. However, specifications are only guaranteed for 0.5–29.99MHz, 50–54MHz, and 144–148MHz. To enable general coverage, select the desired band using the keypad above the tuning knob and then use the tuning knob to adjust the frequency as needed.
This answer is automatically generated