Mounting The Mb-118 - Icom IC-7300 Basic Manual

Mounting the MB-118

Mount the MB-118
mounting bracket
where it can be firmly attached.
L We recommend that you periodically check
whether the screws are loose or not, especially
after a long period of use.
Bolt
Screw
Spring washer
Flat washer
to a place
MB-118 Drill 4 holes of 3 mm (0.12 in) for the bracket location.
L Drill 5.5 mm~5.6 mm (0.21 in~0.22 in) holes when using
the supplied hex screws.
11-2
NOTE:
• Before mounting the MB-118, carefully read
PRECAUTIONS (p. vii) and decide the mounting place.
• DO NOT use bolts other than the ones that are supplied
with the MB-118. Other bolts (longer than 8 mm/0.31 in)
may damage the internal units.
11
OPTIONS
Adjust for the best
viewing angle.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21