Electromagnetic Emissions - Dexcom G5 mobile User Manual

Guidance and Manufacturer's Declaration –

Electromagnetic Emissions

The Dexcom G5 Mobile System is intended for use in the electromagnetic environment specified in the
next table. The customer or the user of the Dexcom G5 Mobile System should ensure that it is used in
such an environment.
Electromagnetic Emissions Specifications
Emissions Test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Recommended Separation Distances Between Portable
and Mobile RF Communications Equipment and the
Receiver
The receiver is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the receiver can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the receiver as recommended in the next table, according to the maximum
output power of the communications equipment. Portable and mobile RF equipment include: baby
monitors, Bluetooth wireless headsets, wireless routers, microwave ovens, laptops with internal
Wi-Fi adapters, GSM cell phones, RFID scanners and hand-held security metal detector often used by
security screeners.
Minimum Recommended Distance Between Other RF Transmitters and
the Dexcom Transmitter/Receiver
Rated Maximum
Output Power of
Transmitter (W)
0.01
Dexcom G5 Mobile System User Guide
Technical Information
Compliance Electromagnetic Environment Guidance
The Dexcom G5 Mobile System uses RF energy only for
its internal function. Therefore, its RF emissions are very
Group 1
low and are not likely to cause any interference in nearby
electronic equipment.
The Dexcom G5 Mobile System is suitable for use in all
establishments including domestic and those directly
Class B
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Separation Distance According to Frequency of Transmitter (m)
150 kHz to 80 MHz
d = 1.2 P
½
0.12
(Continued on next page)
80 MHz to 800 MHz
d = 1.2 P
½
0.12
800 MHz to 2.5 GHz
d = 2.3 P
½
0.23
281