Dexcom G5 mobile User Manual page 81

Removing Applicator Barrel and Collar
10
11
12a
12b
You have successfully inserted the sensor!
At this point, you should have two items attached:
1. The sensor pod
2. The transmitter latch
Having problems?
If it's the first time inserting a sensor, you may have questions or need help. If you do, please
contact your Dexcom G5 Mobile CGM System Technical Support team, 24/7, at:
Dexcom G5 Mobile System User Guide
Starting a Sensor Session: Inserting Sensor, Transmitter, and Starting Your Session
(Continued from previous page)
Move two fingers from above collar to below collar.
Keeping your thumb as a base on the white plunger.
Pull collar all the way back towards your thumb.
You should hear 2 clicks.
NOTE: Finger placement is important for correct
needle removal.
Hold transmitter latch down against your body.
Squeeze ribbed release tabs on the sides of sensor
pod.
Move applicator barrel forward and out, away from
your body.
Follow local ordinances when disposing the applicator.
What's left?
1. Sensor pod
2. Transmitter latch
79