6/ I/O-Area Connectors; Power Connector (Dcin 12V); Table 10: Pin Assignment Dc Jack (Dcin 12V); Figure 4: Dc Jack (Dcin 12V) - Kontron QDS-9400 User Manual

6/ I/O-Area Connectors

6.1. Power Connector (DCIN 12V)

The QDS-9400 has a DC jack on the external I/O connector panel. It must be used to supply the board with +12 VDC
(±5 %).

Figure 4: DC Jack (DCIN 12V)

Table 10: Pin Assignment DC Jack (DCIN 12V)

Pin Signal
1 +12Vin
2 GND
www.kontron.com
Description
+12 V power supply
Ground
QDS-9400 - User Guide, Rev. 1.1
Note
// 24