Acs Compressor Section - SoundCraft Si Impact User Manual

DSP ELEMENTS ACS
ATTAC
Adjust the Attac time of the Compressor
The time it takes for the compression function to reach full attenuation after the threshold has been reached.
The slower the attack time, the 'softer' the compression for less audible 'pumping' (abrupt, repetitive changes in
level).
RELEASE
Adjust the Release time of the compressor
The time it takes for the attenuation (compression) to return to zero after the signal has returned to below the
threshold. Longer release times will soften the compression and reduce audible 'pumping' (abrupt, repetitive
changes in level).
User Manual
COMPRESSOR
7.2.3: DSP ELEMENTS

7.2.3: ACS COMPRESSOR SECTION

A compressor is a threshold driven
process used to reduce the dynamic range
of a signal by applying gain reduction when
the signal level exceeds the threshold and
level consistent.
ou can use compression to increase the
apparent loudness of a signal without in-
creasing the pea level, or to control overly
dynamic sources.
ACS COMPRESSOR