Copy And Paste - SoundCraft Si Impact User Manual

MI FEATURES COP AND PASTE
This facility allows almost any processing section to be copied easily and quic ly from a channel
or bus and pasted to another channel or bus. ou can also copy and paste the internal Lexicon F
settings and Aux, F Send, and Matrix mixes.
hen you press COP PASTE (Touch Screen Main Menu), or when you reselect a channel or bus while the COP
PASTE mode is active, the console s clipboard captures the state of that selection. If you have a channel selected,
that channel s processing (except
LO (tOTEM) buttons, that bus mix is copied.
COPY PASTE
Copies the selected element to the console s clipboard.
Select a channel or Mix Bus to copy those to the clipboard. FX settings are selected by pressing the FX button while
in Copy-Paste mode.
PASTE HOLD
Hold and select a destination to paste the clipboard.
To paste DSP Channel settings, touch a SEL button, to paste a complete Mix Bus mix, touch a tOTEM (FADER
FOLLOW) button, and to paste FX settings, touch the corresponding FX 1-4 tOTEM button (see following examples).
User Manual
AIN or 48V status ) is copied if you have a bus mix selected via the FADER FOL-

8.3: COPY AND PASTE

8.3 : MI FEATURES COP AND PASTE