Acs Gate Section - SoundCraft Si Impact User Manual

DSP ELEMENTS ACS
ATTAC
Adjust the Attac time of the
The time taken for the limiter to reach full attenuation.
RELEASE
Adjust the Release time of the
The time taken for the limiter to return to zero attenuation after limiting.
User Manual
ATE
ate
ate

7.2.2: ACS GATE SECTION

A ate is a threshold-driven gain reduction
process normally used to attenuate a signal
when its level falls below the Threshold.
Setting the Threshold just above a noise
will allow the ate to attenuate the source
during periods when the main input (voice,
instrument etc) is silent.
This gate includes a Sidechain Filter
section. This allows you to control what
frequency range is compared to the
threshold level. For instance, you could
frequencies. In conjunction with a carefully
set threshold this would act as an effective
7.2.2: DSP ELEMENTS ACS ATE