System; Prefs; Fader Setup; Insert / Solo - SoundCraft Si Impact User Manual

4.1: MAIN MENU
User Manual
TOUCH SCREEN MAIN MENU

SYSTEM

System information, Hi net and IP addressing, selective console reset functions, and the
Event Log.
Use the system menu to reset channels, busses, patching, and the whole console. See section 11.2 for more detail.

PREFS

Brightness settings and D.O. .S. system (Direct Out ain Stabiliser) On/Off.
When enabled, D.O.G.S. Adjusts the direct output level from each channel inversely to any manual change of a mic
gain control. See section 11.1 for more detail.

FADER SETUP

Assign DSP channels to Control Channel slots.
Use FADER SETUP to create custom Fader Layers. See section 3.2.1 for more detail.
INSERT
Setup and patching of the four available insert sends and returns.
See section 5 - Inputs & Outputs - For more information. Remember, an insert interrupts signal flow, so if an insert
is assigned to a channel, the signal must have a return path.
SOLO
Solo system settings.
Options include Highlight, Blend, and Solo Trim levels, as well as Solo In Place and Input Priority On/Off. See
section 8.4 for more information.
4.1: TOUCH SCREEN MAIN MENU