SoundCraft Si Impact User Manual page 61

7.2.2: ACS GATE SECTION
User Manual
DSP ELEMENTS ACS ATE
DEPTH
Adjust the Depth value of the ate
The amount of attenuation applied when the gate is closed.
THRESHOLD
Adjust the threshold of the ate
The signal level of the sidechain at which the gate is activated.
S C LPF
Adjust the Sidechain Low Pass Filter
This filter cuts out high frequencies.
S C HPF
Adjust the Sidechain High Pass Filter
This filter cuts out low frequencies.
G te St t s LEDs
Indicate the current operating status of the gate
OPEN (inactive - the gate is passing signal and audio is above the threshold), HOLD (the gate is passing signal but
audio is below the threshold, the gate will close soon), SHUT (audio is below threshold and the gate is closed - the
audio is attenuated according to the DEPTH control value).
GATE On O
Switch the gate process On and Off
Pressing and holding the key will activate Interrogate mode for this function (see Mix Features 8.3).
7.2.2: DSP ELEMENTS ACS ATE