Gate Section; Compressor Section - SoundCraft Si Compact User Manual

GATE SECTION

2
1
3
4
6
6. GATE key: toggles the GATE IN or OUT. Pressing and holding the key will activate
NOTE: Gate function is not available on output buses.

COMPRESSOR SECTION:

1. COMPRESSOR ATTACK & RELEASE: indicates and adjusts the
2. COMPRESSOR GAIN: indicates and adjusts the gain of
3. COMPRESSOR RATIO: indicates and adjusts the compression
4. COMPRESSOR THRESHOLD: indicates and adjusts the
5. GAIN REDUCTION INDICATOR: indicates the amount of dB
6. COMP key: toggles the compressor IN or OUT. Pressing and
16
1. GATE ATTACK & RELEASE: indicates and adjusts the Attack
2. GATE SC HPF/LPF: indicates & adjusts the High Pass and
3. GATE DEPTH: indicates and adjusts how many dB of
4. GATE THRESHOLD: indicates and adjusts the threshold of the
5. OPEN/HOLD/CLOSED indicators: indicate the operation of
5
INTERROGATE mode for this function.
Attack and Release Times of the Compressor.
the compressor, is used to 'make-up' gain lost through
compression of the signal.
ratio within the compressor.
threshold of the compressor.
attenuation applied by the compressor.
holding the key will activate INTERROGATE mode for this
function.
and Release Times of the Noise Gate.
Low Pass filters of the gate side chain to allow more accurate
gating of signals.
attenuation the gate will apply when it is closed.
Noise Gate opening/closing.
the gate:
OPEN = gate is passing signal and audio is above the threshold
HOLD = gate is passing signal but audio is below the threshold,
the gate will close soon
CLOSED = gate is NOT passing signal, audio is below the threshold
Soundcraft Si Compact User Guide 0311
1
2
3
6 5 4