SoundCraft Si Impact User Manual page 89

MI FEATURES CLR & ALT+CLR
CLR GE HI LO FADERS
Reset all raphic E levels to 0dB for the currently selected channel. Only wor s where
bus channels).
CLR tOTEM FADER FOLLOW
Reset all contributions and ON status from channels or buses to the selected bus bac to factory defaults.
CLR M te M ste 1 8
hile in MUTE setup mode: Clear channel mute assignments to the selected Mute Master.
CLR CA M ste 1 8
hile in VCA setup mode: Clear Fader assignments to the selected VCA Master.
ALT CLR F n ti ns
ALT CLR SEL
Reset all audio parameters in all li e-for-li e channels across the whole console (does not affect functions such as
SOLO, bus type, names patching and mute assignment, or preamp gain).
ALT CLR E
Clear all E section parameters across the whole console (on ALL channels).
ALT CLR HPF
Reset all High Pass Filters across the whole console to default.
ALT CLR COMP
Clear all Compressor section parameters across the whole console.
ALT CLR GATE
Clear all ATE section parameters across the whole console.
ALT CLR PHASE
Resets the phase to Off across the whole console.
ALT CLR LR
Resets all LR routing to Off across the whole console.
ALT CLR MONO
Resets all MONO routing to Off across the whole console.
User Manual
tt n
8.7: CLR & ALT+CLR
E
8.7: MI FEATURES
is available (output /
CLR & ALT+CLR