SoundCraft Si Impact User Manual page 87

MI FEATURES MONITORIN
L&R M nit
Enable / disable the Monitor Output patch.
Patching for the monitor output is specified in the separate Monitor L&R OutPatch menu item below.
M n C e
Outputs a mono sum of the stereo monitor signal.
This adds left and right monitor outputs together. A mono check is important when compatibility with mono play-
back devices is required - some delays and stereo processing can cause mono issues that will not necessarily be
obvious when listening in stereo.
Del
Enable / disable the monitor output delay.
The monitor output delay can be used to synchronise the monitor output with, for example, the Front Of House out-
put, which can be subject to system and distance delays, making monitoring in the same environment difficult.
Del Time s m les, millise
Set the Monitor Output delay time.
At 96 Samples, the parameter unit changes to milliseconds (ms)
M nit
Set the physical patching for the monitor output signal.
The Monitor Output patch is additional to the headphones output.
LR M n Le el S
Enable or disable the LR/Mon Level Swap function.
When enabled, this parameter causes the main LR fader to control Monitor level, while the Mon Level Encoder
controls the main LR level.
User Manual
S e e
L&R O t P t
M nit in Settin s Men
ou access the Monitor Settings menu by touching the
MONITOR Touch Screen button from the Main Menu.
n s
8.6: MI FEATURES
8.6: MONITORING
MONITORIN