Gate Section; Compressor Section - SoundCraft Si Performer User Manual

GATE SECTION

2
1
3
4
6
6. GATE key: toggles the gate IN or OUT; illuminates when gate is IN. Press the key to toggle the
gate IN/OUT. Pressing and holding the key will activate interrogate mode for this function.
NOTE: Gate function is not available on output buses.

COMPRESSOR SECTION:

1. COMPRESSOR ATTACK & RELEASE: indicates and adjusts the
attack and release times of the Compressor.
2. COMPRESSOR GAIN: indicates and adjusts the gain of
the compressor, is used to 'make-up' gain lost through
compression of the signal.
3. COMPRESSOR RATIO: indicates and adjusts the compression
ratio within the compressor.
4. COMPRESSOR THRESHOLD: indicates and adjusts the
threshold of the compressor.
5. GAIN REDUCTION INDICATOR: indicates the amount of dB
attenuation applied by the compressor.
6. COMP key: toggles the compressor IN/OUT; illuminates when
compressor is IN, press the key to toggle the compressor IN/
OUT. Pressing and holding the key will activate interrogate
mode for this function.
Soundcraft Si Performer User Guide V1.1 1112
1. GATE ATTACK & RELEASE: indicates and adjusts the attack
and release times of the gate.
2. GATE SC HPF/LPF: indicates & adjusts the high pass and
low pass filters of the gate side chain to allow more accurate
gating of signals.
3. GATE DEPTH: indicates and adjusts how many dB of
attenuation the gate will apply when it is closed.
4. GATE THRESHOLD: indicates and adjusts the threshold of the
gate opening/closing.
5. OPEN/HOLD/CLOSED indicators: indicate the operation of
5
the gate:
OPEN = gate is passing signal and audio is above the threshold
HOLD = gate is passing signal but audio is below the threshold,
the gate will close soon
CLOSED = gate is not passing signal, audio is below the threshold
1
2
3
6 5 4
17