Totem (Fader Follo) - SoundCraft Si Impact User Manual

ASSI NABLE CONTROLS
tOTEM (The One Touch Easy Mix) buttons MI 1-14, MT 1-4, F 1-4, situated just below the ACS,
ma e up the FADER FOLLO
channels in any current Fader Layer.
If your current fader layer is the default A layer (all input channels), then pressing the MI 1 tOTEM button
will assign all channel faders to control the Mix 1 sends for those channels and the Mono control channel
fader to control of the Mix 1 Master. This allows one-touch access to complete bus mixes.
In addition, when a tOTEM button is pressed all existing solos will be cleared, the selected bus will be
soloed, and the ACS will be assigned to the selected bus master channel.
If a tOTEM button is selected that is not applicable to a channel type, then the fader will have no function
(selecting a Matrix (MT ) bus contribution for an input channel, for example).
User Manual
tOTEM (FADER FOLLO )
button group and allow rapid access to bus contributions from
3.4: ASSI NABLE CONTROLS
3.4: tOTEM
tOTEM (FADER FOLLO )