Oscillator - SoundCraft Si Impact User Manual

OSCILLATOR

The console s internal Oscillator is a signal generator provided for various test purposes. It can
generate either a sine wave or pin noise (equal power per octave) and has various routing options
to Mix and Matrix busses, as well as a patchable physical output.
It is not possible to route directly to the console s LR and MONO buses, though you can route the
Oscillator signal to a Mix bus master then use the LR and MONO routing eys.
Oscillator patching is stored in Snapshots Oscillator settings default to Off following a power cycle.
R te T MIX MTX
Route the oscillator signal to individual Mix and Matrix busses.
Oscillator routing to each bus has to be enabled using the SOLO button on that Bus Master.
R te T All
Route the oscillator to all Mix and Matrix busses.
Le el
Set the Oscillator signal level.
User Manual
12: OSCILLATOR
12: OSCILLATOR