Mix Features - SoundCraft Si Impact User Manual

MI FEATURES
Si Impact Mix Features include mix functions outside the normal audio signal path: Mute
VCA roups, Copy and Paste, Interrogate, the Solo system, Monitoring, and the CLR and ALT +
CLR facilities.
8.1: Mute roups
Set up groups of channels that can be muted with a single button press. ou can create up to eight mute
groups, operated by the Mute/VCA roup Master buttons 1-8.
are Mute roup selectors. Mute groups are cumulative, so activating a second Mute
those channels to the number of muted channels.
8.2: VCA roups
Set up groups of channels with faders controlled by a VCA Master fader (which is assigned to a Control
Channel). ou can create up to eight VCA roups using the VCA SETUP button and the Mute/VCA group
Master buttons 1-8.
8.3: Copy & Paste
Copy then Paste whole channels, channel sections, F settings, and Mix bus, F send, and Matrix bus
mixes. Press the PASTE button in the Touch Screen Main Menu to begin the process.
8.4: Audio Interrogate
Interrogate and change the status of ACS button across every channel simply by pressing and holding that
button. For example, chec the status of all channels in one go Press and hold the button to enter Interro-
gate mode.
8.5: Solo System
Listen to individual channels on the monitor mix or main mix (Solo In Place). The automatic solo mode
function chooses PFL or AFL depending on where one or more channels are soloed.
8.6: Monitoring
The Engineer s mix. Solo system integration, delay, mono chec , and patchable outputs,
8.7: CLR & ALT + CLR
console.
User Manual

8.0: MIX FEATURES

hile not is VCA setup mode, the buttons
8.1: MI FEATURES 8.0: MI FEATURES
roups,
roup Master will add
MUTE ROUPS