SoundCraft Si Impact User Manual page 93

9.1 SHOWS
User Manual
SHO S, CUELIST, SNAPSHOTS SHO S
LOAD
You can navigate the internal file system (MMC) or USB key (if present) and select a Show File to load by pressing
the APPLY button. The system will provide a warning that the action will overwrite the current show and allows
the action to be aborted.
SA E AS
When you press SAVE, the QWERTY keyboard is shown with the current show name. You can continue the save
action with the current name (and overwrite) or change the name to create a new show file. Press APPLY to
confirm the name and navigate the file system to confirm the save location.
RESET CONFIG
Clears the console database of any option cards or external I/O systems that may have been attached to the
console then forces a 're-discovery' of any installed option cards or connected I/O system, such as a Soundcraft
Stagebox. The system will provide a warning that the action will overwrite the current configuration database and
allow the action to be aborted.
S N me
Touching the value field will bring up a QWERTY keyboard for editing the name of the show. Press the APPLY
button to confirm.
Gl l Is l te Filte s
If a parameter or group of parameters are set to 'Isolate', they will not be changed from the current setting when
a new snapshot is recalled, even if the snapshot has a different setting. Isolate settings for individual channels are
available via the INPUTS and OUTPUTS menus. NOTE: All parameters are saved with a snapshot, regardless of the
any Isolate settings.
Please note: There are also per-channel Isolates in the INPUTS & VCA and OUTPUTS menus.
9.1: SHO S, CUELIST SHO S