SoundCraft Si Impact User Manual page 81

MI FEATURES COP AND PASTE
User Manual
8.3: COPY AND PASTE
DSP C nnel COPY PASTE
ith a DSP channel (Input Channel or Mix/Matrix
Bus Master) selected, COP PASTE mode will
display a version of the ACS (with
Masters). By touching sections in this Touch Screen
display you can remove individual sections from
the paste operation. To select a single section only,
touch and hold that section in the Touch Screen.
To paste channels and channel selections, touch
and hold the PASTE-hold Touch Screen button and
choose another channel with its Control Channel
SEL button.
Mi B s COPY PASTE
ith a tOTEM button selected you can use COP
PASTE mode to copy and paste an entire MI ,
MT , or F Bus Mix. For example, you could copy
the MI 1 contribution levels from all Input Chan-
nels and paste those levels as a MI 2 mix).
you touch COP PASTE, the mix to be copy-pasted
will be shown in the Touch Screen display.
To paste a Bus mix, touch and hold the PASTE-hold
Touch Screen button and choose another Bus mix
via with the tOTEM buttons.
FX COPY PASTE
To copy and paste settings between the four
Lexicon processors, start by pressing the round
F button while in COP -PASTE mode. This will
display the four processors in the Touch Screen.
Select the processor you want to COP - it will be
highlighted in blue.
To paste, press and hold the Touch Screen
PASTE-hold button, the select another processor
with the four F tOTEM buttons - F 1 - F 4.
8.3: MI FEATURES
E for Bus
hen
COP AND PASTE