Main Mix Outputs Setup - SoundCraft Si Impact User Manual

6.4.1: MAIN MIX OUTPUTS SETUP

User Manual
CHANNELS & BUSSES MAIN MI OUTS SETUP
These offer naming, isolate, and physical output patching.
N me
Name the selected Main Output Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Is l te
Isolate the Main Output Master DSP channel from automation playbac .
When a new cue is loaded, this DSP channel will not be affected and its setting will not be changed. However, current
channel settings are still stored when a cue is stored.
P t in
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be
allocated for both the L&R (Left and Right) and the M (Mono) channels. For more detail, please see section 5 - Inputs
& Outputs. The Mono output patches are also the Centre output patching when using LCR panning.
6.4.1: CHANNELS & BUSSES MAIN MI OUTPUTS SETUP